Rorke Data Galaxy HDX2 GHDX2-2430S-24F4D - Manual (Page 124)

Galaxy GHDX2-2430S/R-24F4D Installation and Hardware Reference Manual
C-2 Pinouts
Pin Pin Name Pin Description
1 V
EET
Transmitter ground (common with receiver
ground)
2 T
FAULT
Transmitter fault; not supported
3 T
DIS
Transmitter disable; laser output disabled on
high or open
4 MOD_DEF(2) Module definition 2; data line for serial ID
5 MOD_DEF(1) Module definition 1; clock line for serial ID
6 MOD_DEF(0)
Module definition 0; grounded within the
module
7 Rate Select No connection required
8 LOS
Indicates loss of signal; logic 0 indicates
normal operation
9 V
EER
Receiver ground (common with transmitter
ground)
10 V
EER
Receiver ground (common with transmitter
ground)
11 V
EER
Receiver ground (common with transmitter
ground)
12 RD- Receiver inverted DATA out; AC coupled
13 RD+ Receiver non-inverted DATA out; AC coupled
14 V
EER
Receiver ground (common with transmitter
ground)
15 V
CCR
Receiver power supply
16 V
CCT
Transmitter power supply
17 V
EET
Transmitter ground (common with receiver
ground)
18 TD+
Transmitter non-Inverted DATA in 100 ohm
termination between TD+ and TD-; AC
coupled thereafter
19 TD- Transmitter inverted DATA in. See TD+
20 V
EET
Transmitter ground (common with receiver
ground)