Rorke Data Galaxy HDX2 GHDX2-2430S-24F4D - Manual (Page 50)

Galaxy GHDX2-2430S/R-24F4D Installation and Hardware Reference Manual
Hardware Installation 2-18
Figure 2-14: Installing a Hard Drive
Step 2. Adjust the drive’s location until the mounting holes in the drive
canister are aligned with those on the hard drive. Secure the drive with
four (4) supplied 6/32 flathead screws. See the diagram below for the
screw hole locations using a drive tray with or without a MUX board.
Figure 2-15: Screw Hole Locations
WARNING!
Only use screws supplied with the drive canisters. Longer screws can damage the
hard drives.