Rorke Data Galaxy HDX2 GHDX2-2430S-24F4D - Manual (Page 30)

Chapter 1: Introduction
1-15
RAIDWatch: RAIDWatch is a premier, web-based or Java-based graphical user
interface (GUI) that can be installed on an adjacent or a remote computer and accessed
via standard TCP/IP.
1.3.4 Audible Alarm
The RAID subsystem comes with audible alarms that are triggered when certain active
components fail or when certain controller or subsystem thresholds are exceeded. When
you hear an audible alarm emitted from the subsystem, it is imperative that you determine
the cause and rectify the problem immediately.
WARNING!
Failing to respond when an audible alarm is heard can lead to permanent
subsystem damage. When an audible alarm is heard, rectify the problem as soon as
possible.
1.4. Hot-swappable Components
1.4.1 Hot-swap Capabilities
The subsystem comes with hot-swappable components that can be exchanged while the
subsystem is still online without affecting the operational integrity of the subsystem.
These components should only be removed from the subsystem when they are being
replaced. At no other time should these components be removed from the subsystem.
1.4.2 Components
The following components are all hot swappable:
ƒ
RAID controller modules
ƒ
PSU modules
ƒ
Host I/O modules
ƒ
Cooling modules
ƒ
Hard drives
ƒ
BBU modules