Rorke Data Galaxy HDX2 GHDX2-2430S-24F4D - Manual (Page 93)

Galaxy GHDX2-2430S/R-24F4D Installation and Hardware Reference Manual
4-26 Subsystem Connection and Operation
4.5.4 LCD Screen
When powering on the subsystem, the following messages should appear on the
front panel LCD screen. Wait for the front panel LCD to show “READY” or
“No Host LUN” before the host boots up.
Figure 4-14: The LCD Initial Screen
The LCD screen startup sequence is shown and described in the sequence
below.
This screen appears when the PSUs are
turned on.
System is performing a self test.
System power-on self test is completed.
System is accessing various interfaces.
Verifying installed memory.
System is ready. You can now start to
configure the subsystem.
System is ready for I/Os.
GHDX2-24
Ready
Model Name
Status/Data Transfer Indicator
Initializing….
Please Wait...
Power On Self
Test Please Wait…
Power on
Init Completed..
GHDX2-24
GHDX2-24
512MB RAM, Wait...
GHDX2-24
No Host LUN
GHDX2-24
Ready