Rorke Data Galaxy HDX2 GHDX2-2430S-24F4D - Manual (Page 54)

Galaxy GHDX2-2430S/R-24F4D Installation and Hardware Reference Manual
Hardware Installation 2-22
Figure 2-21: Cable Clamp and Cable Strap (Cable Mount)
2.10.2 Cable Clamp Installation
Step 1. Connect a power cord to a subsystem power socket so that you can
determine the correct position of the cable clamp along the cable
strap. The diagram below shows the relative positions of a power
cord, cable clamp, and cable strap.
Figure 2-22: Power Cord, Cable Clamp and Cable Strap Positions
Step 2. Connect the cable clamp to the cable strap. Insert the flat angled
end of the cable strap through the small opening (the tie head)
underneath the cable clamp with the smooth side of the strap facing up