Rorke Data Galaxy HDX2 GHDX2-2430S-24F4D - Manual (Page 53)

Chapter 2 Hardware Installation
Hardware Installation 2-21
Figure 2-20: Drive Tray Bezel Lock Rotation
WARNING!
All the drive trays must be installed into the enclosure even if they currently do
not contain a hard drive. If the drive trays are not installed, then the ventilation
required for cooling will not be normalized and the subsystem will be damaged.
2.10. Power Cord Cable Clamp Installation
Several cable clamp assemblies are included in the accessories boxes in the RAID
shipping package. When installing the subsystem, it is recommended to secure all power
cords using these cable clamps to help prevent accidental disconnection that could result
in costly down time.
2.10.1 Component Description
Each cable clamp consists of the following:
1. A cable strap with a “push barb” anchor mount
2. An adjustable cable clamp
The cable strap is secured to the chassis by inserting the barb anchor into the pre-drilled
hole located under each power supply module. The cable clamp is then secured to the
cable strap and is wrapped around the power plug to hold it in place to ensure that the
power cord connection can withstand vibration and accidental impact.