EVS XT3 MulticamLSM Version 11.02 - July 2013 Operation Manual - Manual (Page 101)

5. Do one of the following:
◦ To insert only one clip at the end of the playlist, browse to the clip and press
ENTERon the Remote Panel.
◦ To insert only one clip into the playlist at the last browsing position, browse to the
clip and press SHIFT + INSERTon the Remote Panel.
◦ To insert all clips returned in the search result, press the SHIFT+ENTER keys on
the Remote Panel.
The clips are inserted at the end of the current playlist.
Modifying Distant Playlists
Remote playlists are available as ‘Read Only’, and cannot be edited. If you want to modify
a network playlist, you have to create a local copy on your machine first. This operation is
done instantly if the clips remain in their original location.
Inserting Growing Clips into Playlists
Growing clips can be inserted in playlists in the same way as other clips. However, their
display has the following characteristics:
Display:
• They will be displayed with the ‘Creating’ message in the playlist on the VGA.
• The growing clips ID will be blinking on the mini playlist display and on the playlist
screen on the Remote Panel, as well as on the OSD.
Remaining time:
• The remaining time in playlists containing growing clips with only an IN point is
displayed as --:--:-- on the screens (OSD, VGA, Remote Panel screen) where this
information is shown.
OPERATION MANUAL Multicam LSM 11.02
5. Playlist Management 91