Clip management area – EVS XT3 MulticamLSM Version 11.02 - July 2013 Operation Manual User Manual
Page 56
Clip Management Area
Name Capture Field
This is the only capture area of the screen. It is used to enter the name to assign to a
clip/playlist, or to enter the ID of a clip to recall.
Mode Field
It indicates if the clip screen is currently in CLIP or CAM mode. In CLIP mode, actions on
a clip will use all available cameras for this clip. In CAM mode, actions on a clip will only
use the selected camera for this clip. Default value is CAM mode.
Clip Control Area
It is dedicated to play-out control.
Command
Description
ALT+P:►/■
Plays at 100% speed except for super motion clips which are
played back at 33% speed; and pause playback on the current
picture.
ALT+R:RECUE
Jumps to the Short IN point.Primary.
ALT+T: SET TC
Restripes the timecode of the current clip.
46
4. Clip Management
EVS Broadcast Equipment S.A.
Issue 11.02.A July 2013