EVS XT3 MulticamLSM Version 11.02 - July 2013 Operation Manual - Manual (Page 108)

Available Video Transition Effects
The following video transition effects can be defined. By default, the audio transition is
always a mix when the split audio mode is disabled.
Effect Type Description
Cut No transition effect is applied between both elements.
Mix Dissolve effect between both elements.
Wipe The last frame of the previous element is gradually replaced
by the first frames of the next element.
The wipe effect is shown as a vertical line moving across the
video. The direction of the wipe effect (left to right, right to
left) is defined in the Wipe type parameter in the Operational
Setup menu (p.3.1 F4).
Fade from color (<) A fade out effect from a defined color is applied on the first
frame of the clip (on which the effect is defined). The
previous clip ends in cut mode.
In the drawing below, the previous clip is displayed in red, the
next clip is green, and the fade in black:
Fade to color (>) A fade in effect to a defined color is applied on the previous
clip up to the transition in cut mode to the next clip (on which
the effect is defined).
In the drawing below, the previous clip is displayed in red, the
next clip is green, and the fade in black:
Fade to/from color (V
fade) A fade in effect to a defined color is applied on the previous
clip up to its OUT point and a fade out effect from the same
color is applied on the next clip (on which the effect is
defined) from its IN point. The effect duration must be a
multiple of 2 frames.
In the drawing below, the previous clip is displayed in red, the
next clip is green, and the fade in black:
Note
The color of the fade effects is defined with the Fade to/from color parameter in
the Playlist settings of the Operational Setup menu (p.3.3 F1).
98 5. Playlist Management
EVS Broadcast Equipment S.A. Issue 11.02.A July 2013