EVS XT3 MulticamLSM Version 11.02 - July 2013 Operation Manual - Manual (Page 109)

Associations of Audio and Video Transition Types
The following table shows the possible associations of audio and video transition effects
when the Audio effect duration parameter is not locked to the video in the Operational
Setup menu (p.3.1. F3):
Audio Effect Cut Mix
Fade from
Mute
Fade to
Mute
V Fade
to/from
Mute
Video Effect
Cut √ √
Mix √
Wipe Left ->
Right √
Wipe Right ->
Left √
Fade from color √
Fade to color √
V Fade (to/from
Black) √
Default Values
Default Duration for Video and Audio Transition
It is possible to set a default value for the duration of the video and audio transitions in the
Setup Menu. Once this is defined, each time a clip is entered or inserted into a playlist,
transitions are applied with the default values.
The Video effect duration parameter is available in the Operational Setup menu (p.3.1 F1),
and ranges up to 20:00 secs.
The Audio effect duration parameter is available in the Operational Setup menu (p.3.1 F3).
When the split audio is disabled, the value for this setting is ‘Lock to video’, and the Audio
effect duration is the same as the Video effect duration.
Default Transition Effect
A default mix transition effect (audio and video) is applied to each new clip inserted into
the playlist. However, you can change the type of transition effect in the main menu of the
Playlist Edit mode.
OPERATION MANUAL Multicam LSM 11.02
5. Playlist Management 99