Plst, Insert, Browse – EVS XT3 MulticamLSM Version 11.02 - July 2013 Operation Manual User Manual

Page 24: Goto in

Advertising
background image

Note
By default, users have to connect the clean SDI output to the Loop In connector
given that the OSD of the output monitors are not disabled. If users want to use
the output monitor with characters out, they have to start the Multicam
application with the following parameter : /LOOP_SDI_MON.

This is very useful to “consolidate” effects and edits, or adding live sound or music or
voice to previously recorded material when only the video is looped back into the server.

Note
When playing back at 200% in loop mode, then replaying the looped sequence
at 50%, you can obtain a “film effect”.

PLST

This function is not active if the current playlist is empty. If the current playlist is not
empty, pressing PLST once enters the Playlist Edit mode.

Pressing PLST from the Playlist Edit mode enters the Playlist Playout mode.

Pressing PLST from the Playlist Playout mode re-cues the playlist to its beginning.

Pressing 3 times PLST will always cue up the playlist ready to roll.

To play back a playlist that has been cued, press the PLAY button and it will roll at the
preset speeds.

Insert

This function inserts a clip before or after (depending on the Setup menu) the current
position inside the playlist.

Browse

When a clip is loaded on the primary channel, pressing the BROWSE key allows the
operator to browse inside all local clips of the database by turning the jog dial.

When a cue point exists for the current picture on the primary channel (the CUE button
lights red), pressing the BROWSE key allows the operator to browse through all existing
cue points by turning the jog dial.

When the current picture on the primary channel is neither a clip nor a cue point, or if the
operator is in Playlist mode, pressing the BROWSE key allows him to browse inside the
clips of the current playlist by turning the jog dial.

Goto IN

When you are in CLIP mode, this key combination enables the operator to go to IN / OUT
points of clips, instantly.

14

2. Working Interfaces

EVS Broadcast Equipment S.A.

Issue 11.02.A July 2013

Advertising