EVS XT3 MulticamLSM Version 11.02 - July 2013 Operation Manual - Manual (Page 205)

Hypermotion Secondary Menu
From the hypermotion main menu, press the MENU key to open the hypermotion
secondary menu illustrated hereunder.
# Blocks Pre-Roll PGMSpeed 2ndLever
2 00s10fr 50% +- 1000
This secondary menu lists the hypermotion settings described in the table below. To
modify a setting, press the corresponding softkey and jog to select the requested value.
Setting Description Values
# Blocks Number of memory blocks of the hypermotion camera
to be used, if the connected camera supports this
feature.
The number of blocks displayed in the main menu
depends on the number of blocks specified in this
parameter. 1 to 4
(default: 1)
Pre-Roll Length of the pre-roll for the cue points defined on the
material recorded from the hypermotion camera.
The Last Cue command will go to the desired TC -
pre-roll if the material is available. If not, the pre-roll is
not applied. From 0s01fr to
05s00fr
(default:
00s00fr)
PGMSpeed PGM speed that is to be applied for playing back
material recorded on the hypermotion camera using
the SHIFT+PLAY keys. 50, 100, 200,
300, 400, 1000
(see note)
(default: 100)
2ndLever Secondary lever range to be applied for playing back
material recorded on the hypermotion camera. 0-1000, +- 1000
(default: +-
1000)
Note
The 1000 value for PGMSpeed is not available for all camera models.
OPERATION MANUAL Multicam LSM 11.02
9. Advanced Control Modes 195