Screen description commands description – EVS XT3 MulticamLSM Version 11.02 - July 2013 Operation Manual User Manual
Page 199
Screen Description
Commands Description
Command
Description
V SPLIT / H SPLIT
Toggles between horizontal and vertical Split screen menus
Swap
To swap sources from both sides
Sync
To synchronize the selected PGM with the other one. Press
this button and select the PGM to use as a reference.
Left
To control the left part of the monitor
Right
To control the right part of the monitor
L & R
To control both sides together
SHIFT
Access / Exit special commands
<–Lf–>
To center the left picture
<–Rg–>
To center the right picture
<–WP–>
To move the separation line
•
Press the Left key to take control of the left side of the screen, and recall the desired
clip for this side. Use the command knob to search inside the clip until the desired
picture is reached.
•
Press the Right key to take control of the right side of the screen, and repeat the
same operation with the clip you want to display on the right side.
•
You can also shift horizontally the clips on both sides, so that the action is in the
centre of the picture.
OPERATION MANUAL Multicam LSM 11.02
9. Advanced Control Modes
189