EVS XT3 MulticamLSM Version 11.02 - July 2013 Operation Manual - Manual (Page 121)

OSD Display
On the monitor display, additional information is also displayed when the split audio mode
is active:
The information displayed below the playback speed will display the audio delay/advance
or video delay/advance in frames depending on the editing action applied, or ‘no split’ if no
delay or advance is applied.
How to Insert a Clip into a Playlist with Split Audio
To insert a clip into a playlist with split audio, proceed as follows:
1. Enter the Playlist Edit mode.
2. Browse to the desired clip in the playlist.
3. Press to highlight V Base (SHIFT+A)
4. Press to highlight A Split (D)
5. Jog to the point where you want to set your transition and mark an OUT point if you do
an audio delay or mark an IN point if you do an audio advance.
OPERATION MANUAL Multicam LSM 11.02
5. Playlist Management 111