GE Industrial Solutions AF-650 GP General Purpose Drive (460_575_690V 125HP and above) - Manual (Page 14)

Illustration 3.2: Mounting Template for Unit Size 4X drives (460V, 125 to 300 HP, 575/690V, 125 to 400 HP)
3.2.4 Lifting
Always lift the frequency converter in the dedicated lifting eyes. For all unit size 4X and unit size 52 (IP00) Units, use a bar to avoid bending the lifting holes of the
frequency converter.
Illustration 3.3: Recommended lifting method, 4X and 5X Unit Sizes.
NB!
The lifting bar must be able to handle the weight of the frequency converter. See Mechanical Dimensions for the weight of the different Unit Sizes. Maximum
diameter for bar is 25 cm (1 inch). The angle from the top of the drive to the lifting cable should be 60 degrees or greater.
AF-650 GP High Power Operating Instructions
13
3