Mounting rail and vibration isolation – ClimaCool UGW Manual User Manual
Page 10
www.climacoolcorp.com
8
Mounting Rail and Vibration Isolation
ClimaCool recommends locking down the chiller to a concrete base or to (3) 4” base mounting rails using the six bolt
holes provided in each base pan . Due to the low vibration of the modules, ClimaCool does not require the application of
spring isolators or pads . Should isolators or pads be desired, install in accordance with Figures 4 and 5 .
Figure 4- Spring Vibration Isolators Option
Figure 5 – Vibration Isolation Pads Option
Note: Size and weight distribution to be determined by a qualified structural engineer per individual job requirements.
4” Rail Minimum
Recommended
(by others)
Spring Vibration Isolators
(by others)
Base/Pad (by others)
Base/Pad (by others)
4” Rail Minimum
Recommended
(by others)
Base/Pad (by others)
Vibration Pads (by others)
Base/Pad (by others)