ClimaCool UGW Manual - Manual (Page 36)

www.climacoolcorp.com
34
Control Access Display Table
Page 7 of 15 10/9/2013
Product Line: UGW
Software Version: UGW-H.08B.13 Chiller Type: COOLING 4 PIPE
LOCAL ACCESS DISPLAY TABLE
Mod Active Status DisPr Alm SP: Module Hi Disch Press Setpt mod_hi_disch_press_sp_5 200.0 FALSE
Default Head Pressure Value: Module Default Head Pressure mod_default_hp_5 70.0 50 650 TRUE
Head Pressure Min Adj Value: Module Head Pressure Positive
Adj mod_hp_pos_adj_5
60.0 50 650 TRUE
SucPr Alm 134a Low Suction Press Sp 134a mod_lo_suc_press_sp_134_5 15.0 2 200 TRUE
SucPr Alm 410a Low Suction Press Sp 410a mod_lo_suc_press_sp_410_5 94.0 2 150 TRUE
/SucPr Alm 407C Low Suction Press Sp 407C mod_lo_suc_press_sp_407_5 50.0 2 120 TRUE
Mod Active Status SucPr Alm SP: Module Low Suction Press Setpt mod_low_press_sp_5
15.0 FALSE
Mod SucPr Time Delay Before Alarm: Module LO SUC PSI Delay mod_lo_suc_psi_delay_5 30.0 0 999 TRUE
Mod Extra Low SucPr Alm SP: Module LO-LO SUC PSI Setpoint mod_low_low_press_sp_5 0.0 -5 50 TRUE
Low Dis Pr Ctrl SP R134a Low Head Press Sp 134a mod_lo_disch_press_sp_134_5 100.0 20 350 TRUE
Low Dis Pr Ctrl SP R410a Low Head Press Sp 410a mod_lo_disch_press_sp_410_5 220.0 50 450 TRUE
Low Dis Pr Ctrl SP R407C Low Head Press Sp 407 mod_lo_disch_press_sp_407_5 150.0 50 300 TRUE
Mod Active Status Low DisPr Alm SP: Module Lo Disch Press Setpt mod_lo_disch_press_sp_5 100.0 FALSE
M DisTp Alm SP Module Hi Disch Temp mod_hi_disch_tmp_5 225.0 100 325 TRUE
/M SucTp Alm SP Module Low Suction Temp mod_lo_suction_tmp_5 32.0 10 75 TRUE
LINK(S): PREV, SYSTEM SETUP, HOME
LO SUC SPRHT & LO DISCH SPRHT SETPTS
Screen Display
Content BACnet Object Default Min. Value Max. Value Editable
CoolLogic Suc&Dis SuperHt Alrm Setpts
M Lo DisSuprHt
Module Low Disch SuperHt
Setpt mod_lo_disc_supht_sp_5
15.0 TRUE
/M Lo SucSuprHt Module Low Suct SuperHt Setpt mod_lo_suc_supht_sp_5
2.0 TRUE
LINK(S): PREV, SYSTEM SETUP, HOME
FREEZE TARGET SETPOINT
Screen Display
Content BACnet Object Default Min. Value Max. Value Editable
CoolLogic Freeze Target Setpts Menu
Freeze TrgSp (F)
Module Freeze Target Setpoint mod_freeze_trg_sp_5 36.0 0 50 TRUE
LINK(S): PREV, SYSTEM SETUP, HOME
COMPR MIN MAX RUN TIMES
Screen Display
Content BACnet Object Default Min. Value Max. Value Editable
Compressor Min & Max Run Times
Compr Minimum Run Time (sec)
Module Compr Min Run Time mod_cmpr_min_run_5 120.0 1 999 TRUE
Compr Minimum Off Time (sec) Module Compr Min Off Delay mod_cmpr_off_delay_5 150.0 1 999 TRUE
LINK(S): PREV, ALARM, SYSTEM SETUP, CLOCKSET
COMPR ALARM DELAY
Screen Display
Content BACnet Object Default Min. Value Max. Value Editable
CoolLogic Compr Alarm Delays
Mod Alm Delay
Module Compr Status Alarm
Delay mod_comp_stat_alm_delay_5
9999.0 5 999 TRUE
LINK(S): PREV, SYSTEM SETUP, HOME, ALARM
MODULE WATER TEMP LIMITS
Screen Display
Content BACnet Object Default Min. Value Max. Value Editable
CoolLogic Module Water Out Temp Limits
Mod Evap Wat Out Lo Limit: (F)
Module Freeze Target Setpoint mod_freeze_trg_sp_5 36.0 0 165 TRUE
Mod Evap Wat Out Hi Limit: (F) Module High Evaporator Leaving
Temp at Startup mod_high_evap_lvg_tmp_5
90.0 0 165 TRUE
Mod Cond Wat Out Lo Limit: (F) Module Low Condenser Leaving
Temp. Setpoint mod_low_cond_lvg_sp_5
50.0 0 165 TRUE
Mod Cond Wat Out Hi Limit:
HI WTR OUT UGW
UCW Module High Cond Leaving
Temp at Startup ugw_mod_cwr_trg_sp_5
118.0 10 165 TRUE
/HI WTR OUT UGH UCH Module High Cond Leaving
Temp at Startup ugh_mod_cwr_trg_sp_5
140.0 10 165 TRUE
Mod Cond Wat Out Hi Limit: (F) Module Leaving Cond Water
Temp Setpoint mod_cwr_trg_sp_5
118.0 10 165 FALSE
LINK(S): PREV, SYSTEM SETUP, HOME
SCREW COMP ALARM SETPOINTS
Screen Display
Content BACnet Object Default Min. Value Max. Value Editable
Screw Comp Alarm Setpoints
Screw Comp Max Amps Allowed 460:
Compressor Max Amps mod_max_amps_sp_5 105.0 1 999 TRUE
Winding Temp Correlation to ohms: Compr Max Winding Temp
Sensor Resis mod_max_wind_sens_ohms_5
275.0 1 999 TRUE
LINK(S): PREV, SYSTEM SETUP, HOME, ALARM
SERVICE MENU SETUP FN7
Screen Display Content BACnet Object Default Min. Value Max. Value Editable
Page 7 of 15 10/9/2013
Product Line: UGW
Software Version: UGW-H.08B.13 Chiller Type: COOLING 4 PIPE
LOCAL ACCESS DISPLAY TABLE
Mod Active Status DisPr Alm SP: Module Hi Disch Press Setpt mod_hi_disch_press_sp_5 200.0 FALSE
Default Head Pressure Value: Module Default Head Pressure mod_default_hp_5 70.0 50 650 TRUE
Head Pressure Min Adj Value: Module Head Pressure Positive
Adj mod_hp_pos_adj_5
60.0 50 650 TRUE
SucPr Alm 134a Low Suction Press Sp 134a mod_lo_suc_press_sp_134_5 15.0 2 200 TRUE
SucPr Alm 410a Low Suction Press Sp 410a mod_lo_suc_press_sp_410_5 94.0 2 150 TRUE
/SucPr Alm 407C Low Suction Press Sp 407C mod_lo_suc_press_sp_407_5 50.0 2 120 TRUE
Mod Active Status SucPr Alm SP: Module Low Suction Press Setpt mod_low_press_sp_5
15.0 FALSE
Mod SucPr Time Delay Before Alarm: Module LO SUC PSI Delay mod_lo_suc_psi_delay_5 30.0 0 999 TRUE
Mod Extra Low SucPr Alm SP: Module LO-LO SUC PSI Setpoint mod_low_low_press_sp_5 0.0 -5 50 TRUE
Low Dis Pr Ctrl SP R134a Low Head Press Sp 134a mod_lo_disch_press_sp_134_5 100.0 20 350 TRUE
Low Dis Pr Ctrl SP R410a Low Head Press Sp 410a mod_lo_disch_press_sp_410_5 220.0 50 450 TRUE
Low Dis Pr Ctrl SP R407C Low Head Press Sp 407 mod_lo_disch_press_sp_407_5 150.0 50 300 TRUE
Mod Active Status Low DisPr Alm SP: Module Lo Disch Press Setpt mod_lo_disch_press_sp_5 100.0 FALSE
M DisTp Alm SP Module Hi Disch Temp mod_hi_disch_tmp_5 225.0 100 325 TRUE
/M SucTp Alm SP Module Low Suction Temp mod_lo_suction_tmp_5 32.0 10 75 TRUE
LINK(S): PREV, SYSTEM SETUP, HOME
LO SUC SPRHT & LO DISCH SPRHT SETPTS
Screen Display
Content BACnet Object Default Min. Value Max. Value Editable
CoolLogic Suc&Dis SuperHt Alrm Setpts
M Lo DisSuprHt
Module Low Disch SuperHt
Setpt mod_lo_disc_supht_sp_5
15.0 TRUE
/M Lo SucSuprHt Module Low Suct SuperHt Setpt mod_lo_suc_supht_sp_5
2.0 TRUE
LINK(S): PREV, SYSTEM SETUP, HOME
FREEZE TARGET SETPOINT
Screen Display
Content BACnet Object Default Min. Value Max. Value Editable
CoolLogic Freeze Target Setpts Menu
Freeze TrgSp (F)
Module Freeze Target Setpoint mod_freeze_trg_sp_5 36.0 0 50 TRUE
LINK(S): PREV, SYSTEM SETUP, HOME
COMPR MIN MAX RUN TIMES
Screen Display
Content BACnet Object Default Min. Value Max. Value Editable
Compressor Min & Max Run Times
Compr Minimum Run Time (sec)
Module Compr Min Run Time mod_cmpr_min_run_5 120.0 1 999 TRUE
Compr Minimum Off Time (sec) Module Compr Min Off Delay mod_cmpr_off_delay_5 150.0 1 999 TRUE
LINK(S): PREV, ALARM, SYSTEM SETUP, CLOCKSET
COMPR ALARM DELAY
Screen Display
Content BACnet Object Default Min. Value Max. Value Editable
CoolLogic Compr Alarm Delays
Mod Alm Delay
Module Compr Status Alarm
Delay mod_comp_stat_alm_delay_5
9999.0 5 999 TRUE
LINK(S): PREV, SYSTEM SETUP, HOME, ALARM
MODULE WATER TEMP LIMITS
Screen Display
Content BACnet Object Default Min. Value Max. Value Editable
CoolLogic Module Water Out Temp Limits
Mod Evap Wat Out Lo Limit: (F)
Module Freeze Target Setpoint mod_freeze_trg_sp_5 36.0 0 165 TRUE
Mod Evap Wat Out Hi Limit: (F) Module High Evaporator Leaving
Temp at Startup mod_high_evap_lvg_tmp_5
90.0 0 165 TRUE
Mod Cond Wat Out Lo Limit: (F) Module Low Condenser Leaving
Temp. Setpoint mod_low_cond_lvg_sp_5
50.0 0 165 TRUE
Mod Cond Wat Out Hi Limit:
HI WTR OUT UGW
UCW Module High Cond Leaving
Temp at Startup ugw_mod_cwr_trg_sp_5
118.0 10 165 TRUE
/HI WTR OUT UGH UCH Module High Cond Leaving
Temp at Startup ugh_mod_cwr_trg_sp_5
140.0 10 165 TRUE
Mod Cond Wat Out Hi Limit: (F) Module Leaving Cond Water
Temp Setpoint mod_cwr_trg_sp_5
118.0 10 165 FALSE
LINK(S): PREV, SYSTEM SETUP, HOME
SCREW COMP ALARM SETPOINTS
Screen Display
Content BACnet Object Default Min. Value Max. Value Editable
Screw Comp Alarm Setpoints
Screw Comp Max Amps Allowed 460:
Compressor Max Amps mod_max_amps_sp_5 105.0 1 999 TRUE
Winding Temp Correlation to ohms: Compr Max Winding Temp
Sensor Resis mod_max_wind_sens_ohms_5
275.0 1 999 TRUE
LINK(S): PREV, SYSTEM SETUP, HOME, ALARM
SERVICE MENU SETUP FN7
Screen Display Content BACnet Object Default Min. Value Max. Value Editable
Page 8 of 15 10/9/2013
Product Line: UGW
Software Version: UGW-H.08B.13 Chiller Type: COOLING 4 PIPE
LOCAL ACCESS DISPLAY TABLE
CoolLogic Service Menu Setup FN7
LINK(S): DIAGNOSTICS MANUAL MODE,CALIB WATER DIFF PRESS SENSORS,CALIB WATER MAINS & AIR TEMPS,ALL MODULE SENSOR CALIBRATION MENUS,
ALL MODULE COMP UNLOAD STATUS,RESET MODULE SENSOR OOR ALARMS,RESET COMP ALARMS,MODULE WATER TEMP LIMITS,WATER MAINS & AIR TEMP LIMITS,
PUMP DOWN SETUP,LOCK WATER TEMPS,RESET COMP RUNTIME & CYCLES,TIME MSTR,SCREW PID SEQUENCING DATA,PREV, SYSTEM SETUP, HOME, ALARM
DIAGNOSTICS MANUAL MODE
Screen Display
Content BACnet Object Default Min. Value Max. Value Editable
(/)
Link (/)
Manual Mode M1, Manual Mode M2
Link (/) Manual Mode M3, Manual Mode M4
/
SWAP LEAD COMPR:
Manually Refresh Lead Module man_refr_modlead_1
Do Not
Refresh Lead
Do Not Refresh
Lead, Refresh
Lead
TRUE
LINK(S): MANUAL MODE M5, MANUAL MODE M6,LOCK WATER TEMPS,PREV, SYSTEM SETUP, HOME, ALARM
MANUAL MODE Mx
Screen Display
Content BACnet Object Default Min. Value Max. Value Editable
M1 Manual Mode M1 Manual Mode Enable m1_man_mode_5 Off Off, On TRUE
M1C1 Manual ON M1C1 Manual Run m1c1_man_run_5 Off Off, On TRUE
M1C1 Status: Module 1 Comp 1 Status m1_comp1_status_5 On Off, On FALSE
LINK(S): PREV, SERVICE MENU SETUP, HOME
CALIB WATER DIFF PRESS SENSORS
Screen Display
Content BACnet Object Default Min. Value Max. Value Editable
Calibrate Water Diff Press Sensors
Cool Water Dif Psi Stat: (PSID)
Diff Press Cool Load diff_press_cool_load_1 8.48872 °F FALSE
Cool PsiCalib Offset: (PSID) Chilled Diff Press Calibration
Point chwpsi_cali_point_1
0.0 -199 199 TRUE
Heat Water Dif Psi Stat: (PSID) Diff Press Heat Load diff_press_heat_load_1 8.053761 °F FALSE
Heat Psi Calib Offset: (PSID) Cond Diff Press Calibration Point cwpsi_cali_point_1
0.0 -199 199 TRUE
LINK(S): PREV, SYSTEM SETUP, HOME, ALARM
CALIB WATER MAINS & AIR TEMPS
Screen Display
Content BACnet Object Default Min. Value Max. Value Editable
Calibrate Main Header Water &Air Temps
Evap InSens: (F)
EVAP IN TMP chwr_temp_1 54.4 °F FALSE
/Evap Wat In: (F) CHWR In Temp Status chwr_stat_1 54.4 FALSE
Evap In Calib Offset: (F) CHWR Temp Calibration Point chwr_cali_point_1 0.0 -250 250 TRUE
Evp OutSens: (F) EVAP OUT TMP chws_temp_1 50.1 °F FALSE
/Evap WatOut: (F) CHWS Out Temp Status chws_stat_1 50.2 FALSE
Evap Out Calib Offset: (F) CHWS Temp Calibration Point chws_cali_point_1 0.0 -250 250 TRUE
Cnd Out Sens: (F) COND OUT TMP cwr_temp_1 83.3 °F FALSE
/CndWat Out: (F) CWR Out Status cwr_stat_1 83.3 FALSE
Cond Out Calib Offset: (F) CWR Calibration Point cwr_cali_point_1 0.0 -250 250 TRUE
Cond In Sens: (F) COND IN TMP cws_temp_1 67.3 °F FALSE
/Cnd Wat In: (F) CWS In Temp Status cws_stat_1 67.3 °F FALSE
Cond In Calib Offset: (F) CWS Temp Calibration Point cws_cali_point_1 0.0 -250 250 TRUE
Outdoor Sens: (F) OA Temp oat_1 -60.2 °F FALSE
/Outdr Air : (F) OAT Status oat_stat_1 61.0 FALSE
Outdoor Air Calib Offset: (F) OAT Calibration Point oat_cali_point_1 0.0 -250 250 TRUE
LINK(S): PREV, SYSTEM SETUP, HOME
ALL MODULE SENSOR CALIBRATION MENUS
Screen Display
Content BACnet Object Default Min. Value Max. Value Editable
CoolLogic All Module Calibration Menus
LINK(S): MODULE 1 SENSOR CALIBRATIONS,MODULE 2 SENSOR CALIBRATIONS,MODULE 3 SENSOR CALIBRATIONS,MODULE 4 SENSOR CALIBRATIONS,
MODULE 5 SENSOR CALIBRATIONS,MODULE 6 SENSOR CALIBRATIONS,PREV, SYSTEM SETUP, HOME, ALARM
MODULE X SENSOR CALIBRATIONS
Screen Display
Content BACnet Object Default Min. Value Max. Value Editable
ClimaCool Module 1 Water Calibrations
EvpOutCalib: (F)
M1 CHWS Temp Calib. Point m1_chws_temp_cp_5 0.0 -250 250 TRUE
/EvpOutSta: (F) M1 Evap Leaving Temp m1_chws_temp_stat_5 51.7 FALSE
CndOutCal: (F) M1 CWR Temp Calib. Point m1_cwr_temp_cp_5 0.0 -250 250 TRUE
/CondOutStat: (F) M1 Cond Leaving Temp m1_cwr_temp_stat_5 84.6 FALSE
ClimaCool Module 1 Refrig Calibrations
C1DisPresCal: (psi)
M1C1 DIS Pressure Calib. Point m1c1_disch_pres_cp_5 0.0 -250 250 TRUE
/C1DisPr: (psi) Module 1 Comp 1 Disch Press m1_c1_disch_pres_stat_5 99.3 0 350 FALSE
C1SucPresCal: (psi) M1C1 SUC Pressure Calib. Point m1c1_suc_pres_cp_5
0.0 -250 250 TRUE