8 recording options - actions, Recording options - actions – Teledyne LeCroy BTTracer_Trainer - BTTracer Users Manual User Manual
Page 114
Advertising
104
BTTracer Protocol Analyzer User’s Manual
CATC
SW Version 2.20
• Input 1 (TRIG IN 1) - Selectable Edge triggered inputs. Will
trigger on any edge it detects. Note that only Data1 - Data0 can
be recorded into the trace.
Breakout Board Data 7:0 (Edge Triggered) - Triggers on an 8-bit input
pattern on any of the breakout board pins marked Data 0 through 7.
Rear Panel BNC Connector (Edge Triggered)
• Input 2 (EXT IN): Selectable Edge triggered inputs. Will trigger
on any edge it detects.
6.8 Recording Options - Actions
The Actions screen allows you to specify the type of action that BTTracer
should perform when it encounters the events specified in the Events
window.
Advertising