5 edit or clear marker, Edit or clear marker – Teledyne LeCroy BTTracer_Trainer - BTTracer Users Manual User Manual
Page 135
Advertising
125
BTTracer Protocol Analyzer User’s Manual
CATC
SW Version 2.20
You can define a unique Marker for each packet.
To place a marker on a packet,
Step 1
Left-click on Packet # for the packet you wish to mark.
Step 2
Select Set Marker.
You see the Edit Marker Comment window where you can enter a
unique comment about this packet.:
Step 3
Enter your comment.
Step 4
Click OK.
A marked packet is indicated by a vertical red bar along the left edge of the
packet # block:
8.5 Edit or Clear Marker
To clear or edit the comments associated with a packet marker,
Step 1
Left-click on Packet # for the chosen packet.
Advertising