Teledyne LeCroy BTTracer_Trainer - BTTracer Users Manual - Manual (Page 26)

16
BTTracer Protocol Analyzer User’s Manual CATC SW Version 2.20
Step 3
From the menu, select Setup > Recording Options.
The Recording Options dialog opens with the Inquiry page displaying.
Step 4
If desired, make any changes to the options, then click OK.
Step 5 Click the button (i.e. not the down-arrow.)
BTTracer starts to record the Bluetooth traffic immediately using the settings from
the Piconet page in the Recording Options dialog. The Bluetooth Inquiry process
will proceed for whatever amount of time is set for creating an Inquiry action (the
default is 11 seconds). After the inquiry time has elapsed, the analyzer will upload
the data and display the packets. In addition, the Device List window will open
and display the updated statuses of the devices.
The screen should look like the sample recording below which shows the FHS
packets generated during the Inquiry process.