Teledyne LeCroy BTTracer_Trainer - BTTracer Users Manual User Manual
Page 77
Advertising
67
BTTracer Protocol Analyzer User’s Manual
CATC
SW Version 2.20
The following dialog box will display:
Step 17
Press Retry or Back to re-attempt the process.
If the hardware failure described above do not occur, BTTracer will
conduct an inquiry. The screen will show that BTTracer is going to
attempt a recording in either ’Passive Sync & Record’ mode as shown
below or in ’Sync & Record’ mode depending on the options you
selected in Step 15.
Advertising