Teledyne LeCroy BTTracer_Trainer - BTTracer Users Manual - Manual (Page 35)

25
BTTracer Protocol Analyzer User’s Manual CATC SW Version 2.20
3. Updates
BusEngine and Firmware updates often need to be performed when you
update the BTTracer software. These updates can be performed
automatically or manually. Both processes are described.
3.1 Update Files
Update files are installed with the BTTracer software during the installation
procedure and reside in the local directory of the analyzer application.
During the update process, the files are taken from this location.
The following update files are provided with each release:
BusEngine - For updating the hardware logic (has an *.rbf extension).
Firmware- For updating the platform firmware (has an *.hex extension).
BT Firmware - For updating the Bluetooth firmware (has an *.esw
extension).
3.2 Automatic Updates
When you update the analyzer software, the software may become
incompatible with the BusEngine and Firmware. If a recording is attempted,
analyzer displays an error message and then automatically begins an update
process for the BusEngine and Firmware.
To update the BusEngine and/or Firmware, follow these steps:
Step 1
If needed, update the analyzer software, following the steps outlined
in "Software Updates."
Step 2
Turn on the analyzer.
Step 3 From the Record menu, select Start.
Because the BusEngine and/or the Firmware are incompatible with
the current analyzer software version, an error message appears