3 exporting audio data, Exporting audio data – Teledyne LeCroy BTTracer_Trainer - BTTracer Users Manual User Manual
Page 155
145
BTTracer Protocol Analyzer User’s Manual
CATC
SW Version 2.20
of a .csv file opened in Microsoft Excel.
10.3 Exporting Audio Data
BTTracer has an Export Audio Streams command that allows you to
extract audio data from a trace and export it into a file. The command lets
you narrow your selection to a particular stream direction (master to slave
or slave to master), and to set the output file format and output sampling.
Step 1
Select File > Export > Audio Streams from the menu.
The dialog box shown right opens.
Source Audio Format - Select the
Source format.
Output File Format - Select an
output format: WAVE or raw.
Stream Direction - Select stream
direction that you wish to capture:
Master to Slave, Slave to Master, or
both ("Combine M/S").
Output Sampling - Select a
sampling rate for the exported audio.
Step 2
Set the parameters, then click Save.
A Save As dialog opens.
Step 3
Select the name of the file to be
created and its location, then click OK.