Teledyne LeCroy BTTracer_Trainer - BTTracer Users Manual User Manual
Page 61
Advertising
51
BTTracer Protocol Analyzer User’s Manual
CATC
SW Version 2.20
within range, then press Next. The following screen will display.
You will see two options:
Step 4
In the text box, enter the length of time you want BTTracer to search
for nearby devices.
The default value is 11. If you do not sure what time value to enter, use
the default value.
Step 5
Press Next.
Before the Inquiry, BTTracer tests the hardware connection. In the case
of failure, the following screen will display.
Clicking OK will close the message box.
Advertising