Teledyne LeCroy BTTracer_Trainer - BTTracer Users Manual User Manual
Page 22
12
BTTracer Protocol Analyzer User’s Manual
CATC
SW Version 2.20
Once BTTracer has been recognized as a USB device, install the BTTracer
software on the PC administering the analyzer.
Step 1
Insert the BTTracer CD into the CD ROM drive of the PC
that will be administering the Analyzer.
Step 2
Follow Windows on-screen Plug-and-Play instructions for the
automatic installation of the BTTracer Analyzer as a USB device on
your analyzing PC (the required USB files are included on the
BTTracer CD.
Step 3
Select Install Software from the installation CD and follow
the on-screen installation instructions.
The BTTracer application will install on the PC hard disk.
Step 4
To start the application, launch the CATC BTTracer program from
the Start Menu: Start>Programs>CATC>BTTracer.
The BTTracer program opens.
The window shows a menu bar and toolbar at the top, a grey trace viewing
area covering most of the window, and a status bar at the bottom.
Opening a sample trace will cause most of the buttons on the toolbar to
become active.