Teledyne LeCroy BTTracer_Trainer - BTTracer Users Manual - Manual (Page 76)

66
BTTracer Protocol Analyzer User’s Manual CATC SW Version 2.20
Step 14
Press Next
BTTracer will then display your current settings.
The Advanced button will open the Recording Options dialog box
shown on page 55 and described in detail in Chapter 7.
Step 15
Press Next to begin the recording.
If the BTTracer hardware is not ready or connected or is in the process of
booting up, the following information message box will display:
Step 16 If the above information box opened, press OK to close it.