Teledyne LeCroy BTTracer_Trainer - BTTracer Users Manual - Manual (Page 170)

160
BTTracer Protocol Analyzer User’s Manual CATC SW Version 2.20
Step 6
Press OK.
The trace will redisplay so that it excludes DM1s, Polls, or any packet with
LT_Addr=7.
Find Next
To apply the previous Find parameters to the next search,
• Select Find Next under Search on the Menu Bar
OR
Click on the Tool Bar.
11.2 Device List
Device List describes devices discovered in a previous inquiry or was
entered by the user. The list is stored in a file from one session to the next,
so the information one a device that was collected in previous sessions or
was manually entered can always be viewed.
By default, Device List appears at the bottom of the BTTracer application
window. If is not open, you can open it by selecting View > Device List.
Fields in the Device List
• State -- Device State
• BD_ADDR -- Bluetooth Device Address
• Alias -- Whatever alias you entered for the device in the Add New
Device dialog
• Class -- The device class for each listed device
• Clock Freq -- Shows the device's Clock Frequency
• Security -- If Encryption is enabled, then this field will be marked
with a "Yes." You enter Encryption by clicking the Add Devices
button, and then clicking Options
• Last Update -- Shows when device information was last updated
• User Notes -- User comments. You add notes by clicking Add
Devices and entering text into the dialog box