2 set marker – Teledyne LeCroy USBTracer_Trainer - Users Manual User Manual
Page 109
Advertising
USB Protocol Suite User Manual
Chapter 5: Reading a Trace
LeCroy Corporation
95
5.2 Set Marker
You can define a unique Marker for each packet.
To place a marker on a packet:
Step 1 Right-click Packet # for the packet to mark, to display the Packet menu:
Step 2 Select Set Marker.
You see the Edit Marker Comment window.
Step 3 Enter a comment about the packet.
Step 4 Click OK.
A marked packet has a vertical red bar along the left edge of the packet # block:
Advertising
This manual is related to the following products: