Teledyne LeCroy USBTracer_Trainer - Users Manual - Manual (Page 225)

USB Protocol Suite User Manual Chapter 9: Reports
LeCroy Corporation
211
Note: Power measurement accuracy for Current is +/- 10 mA.
Power measurement accuracy for Voltage is +/- 50 mV.
Power measurement accuracy for Power is +/- 50 mW.
The sampling period of the current and voltage is once every 20 microseconds, or
50 KHz.
9.13.1 Power Tracker Toolbar
The buttons have the following functions:
Zoom in Pointer Mode
Zoom out Hand Panning
Zoom by Selection
Insert Time markers.
After clicking, click in the display to
make a red vertical line. Select and
drag the line to indicate a time
interval between two lines.
Zoom by Horizontal Drag Monitor during capture
Zoom by Vertical Drag
Show/Hide Power Tracker Types:
Power, Voltage, and/or Current
Change Power Tracker graph type:
Bar, Line, and/or Point
Full Screen
Sync by Time.
Synchronize the USB3 Link State
Timing States View and the
Trace View.