Teledyne LeCroy USBTracer_Trainer - Users Manual - Manual (Page 281)

USB Protocol Suite User Manual Chapter 10: Recording Options
LeCroy Corporation
267
10.6.8 Events and Event Properties for USB 3.0
Recording rules are associations between events and actions. These associations
determine how trace recording occurs. The supported events for USB 3.0 are:
•
Packet Type
• Link Management Packets
• Transaction Packets
• Data Packet Header
• Isoch Timestamp Packets
• Data Packet (DP) (for software version 3.71 and higher)
• Data Packet (DPH+DPP) (for software version 3.70 and lower)
• All Link Commands
• Link Command Flow Control
• LGOOD_0 through LGOOD_7 and LGOOD_n
• LBAD
• LCRD_A through LCRD_D and LCRD_x
• LRTY
• Link Command Link State
• LGO_U1, LGO_U2, LGO_U3
• LAU
• LXU
• LMPA
• LUP
• LDN
• LFPS
• Training Sequences
• TS1
• TS2
• TSEQ
• Header Pattern
• Link Management Packet
• Set Link Function
• U2 Inact Tmt
• Vndr Dev Test
• Port Capability
• Port Config
• Port Cfg Rsp
• Transaction Packet
• ACK
• NRDY
• ERDY
• STATUS
• STALL
• DEV_NOTIFICATION
• PING
• PING_RESPONSE
• HOST_NOTIFICATION
• Data Packet Header
• Isoch Timestamp Packet)
• External Trigger In (Voyager)