Teledyne LeCroy USBTracer_Trainer - Users Manual - Manual (Page 350)

Chapter 12: Traffic Generation (3.0 Exerciser) USB Protocol Suite User Manual
336
LeCroy Corporation
Step 2 Set the Recording Options, in the Misc USB 3.0 tab, to run the Electrical tests.
To test a USB Device, in the Recording/Generating section, select
Host Emulation mode.
To test a USB Host, or the downstream port of a USB 3 hub, select
Device Emulation mode.
In the M3i USB Connector Termination/RxDetect section, in the Analyzer Ports
subsection, select Manual termination.
Click the OK button to apply the options.