Teledyne LeCroy USBTracer_Trainer - Users Manual User Manual
Page 74
Advertising
Chapter 3: Installation
USB Protocol Suite User Manual
60
LeCroy Corporation
Step 3 To change to Static IP, click the Static IP radio button.
Enter the IP Address.
Enter the Subnet Mask.
Enter the Default Gateway.
Click Apply to get a success message and return to the Analyzer Devices
dialog.
Note: You can let the system Suggest static IP settings (IP address and
subnet mask).
Step 4 Click Close to close the dialog and use the device with a Static IP address.
Advertising
This manual is related to the following products: