5 go to usb3.0, 1 packet type – Teledyne LeCroy USBTracer_Trainer - Users Manual User Manual
Page 147
Advertising
USB Protocol Suite User Manual
Chapter 6: Searching Traces
LeCroy Corporation
133
6.5 Go To USB3.0
The Go To USB3.0 feature takes you directly to an event in a Trace.
Step 1 Select Go To USB3.0 under Search on the Menu Bar to display the
Go To USB3.0 drop-down menu. For 3.0 data, the menu is:
Step 2 Select the event you want to go to and enter the necessary information.
The resulting item will be shown as selected in the view.
6.5.1 Packet Type
Select the Packet Type to which you want to go.
Advertising
This manual is related to the following products: