Teledyne LeCroy USBTracer_Trainer - Users Manual - Manual (Page 340)

Chapter 12: Traffic Generation (3.0 Exerciser) USB Protocol Suite User Manual
326
LeCroy Corporation
Option Button
After insetting a SCSI Command, a Task Management Functions, or a Transfer packet,
at the end of the packet an extra button, called Option, is shown. After clicking this button,
you can set some protocol errors and command settings for that item.
ErrCorruptSHP section has Disable, Number of items, Infinite, and SHP Map
(no corruption or Corrupt Symbol 1, 2, or 3).
ErrCorruptSDP section has Disable, Number of items, Infinite, and SDP Map
(no corruption or Corrupt Symbol 1, 2, or 3).
ErrCorruptEND section has Disable, Number of items, Infinite, and END Map
(no corruption or Corrupt Symbol 1, 2, or 3).
ErrCorruptSLC section has Disable, Number of items, Infinite, and SLC Map
(no corruption or Corrupt Symbol 1, 2, 3, or 4).
Error Injection section has CRC Error or Bypass Priming.
Task Attribute section has Sample, Head of Queue, Ordered, and ACA.
Script Scenarios
For some special purposes in which graphical scenario features are limited, you can
convert a graphical scenario to a script scenario, which you can then modify.
Note: The software does not support converting a text scenario to a graphic scenario.
Save
You can save a created project by selecting File > Save.
You can run a saved project by selecting Generation > Run Scenario or using the
Run Toolbar.