Teledyne LeCroy USBTracer_Trainer - Users Manual - Manual (Page 169)

USB Protocol Suite User Manual Chapter 8: Decode Requests
LeCroy Corporation
155
Chapter 8: Decode Requests
8.1 Class and Vendor Definition Files
LeCroy Analyzers use script files to decode class and vendor requests. The script files
are read when the application is initialized. After reading, the Analyzer decodes class and
vendor requests as instructed by the files.
.DEC files represent the new method of decoding. DEC stands for “decoder” and
describes both Class and Vendor requests in a C-like language. Each .dec file stores an
endpoint or request decode. When the application starts, these files are loaded
dynamically. Subdirectories are supported.
Note: The .dec files listed in the following table are in the Scripts directory under the
installation directory:
USB Decode USB
Decoder
Name USB-IF
Base
Class
Codes
Sub
Class
Proto-
col
ID
Audio Class decoding 2.0
AudioClass\Audio1.0Requests.dec
AudioClass\Audio2.0Requests.dec
Audio 01h
Communications and CDC Control
Direct Line Control Model
Abstract Control Model
Telephone Control Model
Multi-Channel Control Model
CAPI Control Model
Ethernet Networking Control Model
ATM Networking Control Model
Wireless Handset Control Model
Device Management Model
Mobile Direct Line Model
OBEX Model
Communication Device Subclass/EEM
Communications\CommRequests.dec
Communications\CommInterrupt.dec
Communications\CommCDCEEM.dec
Communication
Communication
Communication
Communication
Communication
Communication
Communication
Communication
Communication
Communication
Communication
Communication
Communication 02h
02h
02h
02h
02h
02h
02h
02h
02h
02h
02h
02h
02h
01h
02h
03h
04h
05h
06h
07h
08h
09h
0Ah
0Bh
0Ch