Teledyne LeCroy USBTracer_Trainer - Users Manual - Manual (Page 69)

USB Protocol Suite User Manual Chapter 3: Installation
LeCroy Corporation
55
Step 4 Using the screwdriver, loosen both retaining screws by rotating
counter-clockwise approximately two full turns, until feeling slight resistance.
Do not force the retaining screws after two turns.
Step 5 Using the extraction tool as a handle, gently wriggle the expansion card forward
about 1/8”.
Step 6 Repeat steps 4 and 5 approximately three times, until the card is free from the
retaining screws and you can remove the card from the system.