9 loading and running the generation file, 1 starting traffic generation, 2 stop traffic generation – Teledyne LeCroy USBTracer_Trainer - Users Manual User Manual
Page 342
Chapter 12: Traffic Generation (3.0 Exerciser)
USB Protocol Suite User Manual
328
LeCroy Corporation
12.9 Loading and Running the Generation File
The USB 3.0 Traffic Generation files are scripts that instruct the Analyzer how to generate
USB 3.0 traffic. A traffic generation file contains text in special format and is named with
a *.usb3g extension. There are several examples of Traffic Generation files included with
the installation of the software.
To load a generation file:
Step 1 Select File > Open ... from the menu to display the Open dialog box.
Step 2 Select Usb3Script Files (*.usb3g) from the drop-down menu marked
Files of Type to display a list of USB 3.0 Traffic Generation files.
Step 3 Select a Traffic Generation file (*.usb3g).
Step 4 Click Open.
12.9.1 Starting Traffic Generation
To start traffic generation, click
on the Tool Bar.
Click the Trace Preview
button to check the file.
12.9.2 Stop Traffic Generation
To instruct the Analyzer to halt traffic generation, click
on the Tool Bar.