Teledyne LeCroy USBTracer_Trainer - Users Manual - Manual (Page 267)

USB Protocol Suite User Manual Chapter 10: Recording Options
LeCroy Corporation
253
10.5.5 Assigning an Action
After you have dropped the Event button in a cell in the Main Display area, you can assign
an action to the event.
Note: If you do not assign an action to an Event button, the analyzer ignores the
event.
To assign an action to an Event button:
Step 1 Right-click the Event button to display a pop-up menu.
Step 2 Select Specify Action, and then choose an action from the submenu.
The menu closes, and the action is assigned.
Note: You can also set actions within the Properties dialog for each event.
Double-click the Event button to open the Properties dialog, then select the
Actions tab and set your actions.