Teledyne LeCroy USBTracer_Trainer - Users Manual User Manual
Page 304
Chapter 11: Traffic Generation (2.0)
USB Protocol Suite User Manual
290
LeCroy Corporation
Step 4 Click Open. The file opens.
Step 5 Decide how many times you want the traffic pattern to be generated, then select
a value from the Repeat drop-down menu.
The Repeat mode allows for a single pass through the generation file, looping
forever, or looping 1 to 65,534 times, as desired by the user. If a wrap=HERE
location is found in the .utg file, that location is where the looping portion begins.
The loop end is at the end of the .utg file or up to the stop=HERE statement in
the file.
Step 6 Select the Generation mode in which to generate traffic (see below for an
explanation) by depressing or undepressing the
IntelliFrame button
on the toolbar:
•
Depressed = IntelliFrame
•
Undepressed = Bitstream