Teledyne LeCroy USBTracer_Trainer - Users Manual - Manual (Page 86)

Chapter 4: Software Overview USB Protocol Suite User Manual
72
LeCroy Corporation
Repeat Mode
Allows you to repeat once, a specified number of times, or an infinite
number of times using the Generation Repeat Mode window.
(2.0 only)
Report
File Information Displays information about the recording, such as the number of
packets and triggering setup.
See “File Information” on page 177.
Error Summary Summarizes the errors throughout the recording. Allows for fast
navigation to packets with errors.
See “Error Summary” on page 179.
Timing Calculations Calculates timing between two packets and bus utilization.
See “Timing Calculations” on page 180.
Data View Shows packet information.
See “Detail View” on page 205.
Traffic Summary Summarizes the numbers and types of errors, packets, transactions,
split transactions, and transfers that occurred in the open trace.
See “Traffic Summary” on page 184.
Bus Utilization Displays graphs of packet length, bus usage, and bus usage by
device.
See “Bus Utilization” on page 186.
Link Tracker Opens a window for displaying a detailed chronological view of
traffic. The window provides view and navigation options.
See “Link Tracker (3.0)” on page 193.
Navigator Allows you to view the location of errors and triggers in a
trace, narrow the range of traffic on display, and jump to any
point in the trace.
See “Using the Trace Navigator” on page 198.
Detail View Displays details of selected packet.
See “Detail View” on page 205.
Spec View Shows packet header information and other items, in a view that
matches the USB 3.0 specification.
See “Spec View (3.0)” on page 206.
USB3 Link State
Timing View Graphically shows how much time the link spends in each link
state.
See “USB3 Link State Timing View” on page 207.
USB3 LTSSM view Displays the LTSSM diagram depicted in the USB 3.0 specification.
See “USB3 LTSSM View” on page 209.
Power Tracker Displays voltage, current, and power.
See “Power Tracker” on page 210.
Run Verification
Scripts Opens a window to allow you to run verification scripts over the
open trace.
See “Running Verification Scripts” on page 212.
Menu Function