Teledyne LeCroy ArbStudio - Manual (Page 109)

Operator’s Manual
922244-00 Rev A 101
B
Pattern Settings - The Trigger In Tab
S
OURCE
C
ONNECTOR
Select the physical source for a Trigger In event. The possible options
include:

BNC Trigger IN - The trigger event is received by the dedicated BNC
Connector on the instrument front panel.

Pod A Trigger IN - The trigger event is received by a dedicated Digital
input of the probe connected to the Pod A in the instrument front
panel - see Probe Description.
NOTE: Trigger IN source setting is mutually exclusive.
E
DGE
Allows you to set the sensitive edge for the input trigger as either a Rising
or Falling Edge.
A
CTION
You can set the Start or Stop action to be performed by a possible input
Trigger event.