Teledyne LeCroy ArbStudio - Manual (Page 25)

Operator’s Manual
922244-00 Rev A 17
B
NOTE: If Windows shows the Found New Hardware Wizard, click Cancel.
Only use the ArbStudio Software and Driver installation procedure to
configure your system.
Now, with correct application software, drivers, and the latest .NET
Framework installed, your ArbStudio is ready for use.
Initial ArbStudio Software Interfaces
The ArbStudio software environment provides access to all product
functions. The interface allows you to control up to eight devices
connected by the Expansion Bus Cable configuring them as Arbitrary
Waveform Generators, Digital Pattern Generators, or Mixed Mode
Generators.
ArbStudio Workspace
The ArbStudio software workspace consists of two main elements:

The main document editing area, shown on the right side on the
following screen-shot.

The ArbStudio Control Navigation Tree, shown on the left side on
the following screen-shot.