Teledyne LeCroy ArbStudio - Manual (Page 88)

ArbStudio
80 922244-00 Rev A

Go to time - Moves the master cursor to the time position specified
in the text field to the left of the control.

Go to start samples - Moves the master cursor and visualization
area to the start of the acquisition.

Go to end samples - Moves the master cursor and visualization area
to the end of the acquisition.

Marker n - Centers the visualization area on the cursor/marker n
(position specified in the text field to the left of the control).
You can also move the selected cursor to the middle of the current
visualization by clicking the Move active cursor here button.
Search
Searching can be done from the Waveform Sequencer. It also is available in
the aforementioned search section regarding the State Listing and
Waveform View screens.
You can search for a specific bus, signal, rising, or falling edge value.
Activate the search option by clicking the Search Settings button.
The Search Settings window is shown and used to provide your search
criteria.