Operator’s manual – Teledyne LeCroy ArbStudio User Manual
Page 161
Advertising
Operator’s Manual
922244-00 Rev A
153
B
configured under Arbitrary Waveform Generator operating mode in
your workspace.)
The DEV1 Settings Ch 1 pop-up screen is shown.
The General Tab is shown by default when the pop-up displays. On
the General Tab be sure to select an Output Impedance value
suitable for your impedance load. For example, if you need to
connect the instrument to an oscilloscope, select 50 Ω as the output
impedance load and 50 Ω as the input impedance on the
oscilloscope channel.
Advertising