Teledyne LeCroy ArbStudio - Manual (Page 36)

ArbStudio
28 922244-00 Rev A
6. Now, on the Device Control Tree, double click the Waveform
Sequencer item under Channel 1.
7. Click the Add Standard Waveform button.
The Waveform Standard Editor form is shown.
8. Choose a sine waveform with the following specs:

1 MHz frequency

250 samples

1 Volt amplitude
9. Select the Waveform1 on the Project Waveform tab and click the
Add button to include the waveform to the sequencer.