Strobe tab, Channels output voltage (arbitrary and dds), Pod a/b (pattern generator) – Teledyne LeCroy ArbStudio User Manual
Page 58
ArbStudio
50
922244-00 Rev A
Strobe Tab
Channels Output Voltage (Arbitrary and DDS)
Use to set the DC Output voltage for the selected channel.
Pod A/B (Pattern Generator)
Use this panel to assign values to Digital Pattern Generator (optional) pins,
read their status, or set in a high impedance state. Use the following
explanations to guide your settings.
Strobe Vectors - Allows the assignment of values to Vectors[15..0],
to the Extended Trigger signal and to the Write RAM signal. By
pressing the Strobe button, the output pins change their logic levels
to the ones assigned.
Pods status - The Digital Pattern Generator can also operate as a
Sampler. Digital channels change their behavior from outputs to
inputs. When the Read Pods Status button is pressed, the logic level
of each input can be examined in real time.
HiZ Strobe - By pressing the Set HiZ button all digital channels will go
in a high impedance state.