Operator’s manual – Teledyne LeCroy ArbStudio User Manual
Page 171
Advertising
Operator’s Manual
922244-00 Rev A
163
B
Your new segment (Segment 1) should be shown on the Amplitude
Modulation List and the Edit Segment dialog is shown on the lower
part of the screen.
On the Edit Segment dialog, set the Type to Triangle, Duration to 2
µs, Cycles 1, Frequency 100k, Phase 0, and Offset 500k.
4. Now, double-click Settings under Channel 1 (DDS) on the Device
Control Tree. (Channel 1 can be any DDS channel you have
configured under Arbitrary Waveform Generator operating mode in
your workspace.)
Advertising