Choosing the test configuration, Setting the loss limit – Agilent Technologies N2610A User Manual
Page 110
Advertising
102
Agilent FrameScope 350 User’s Manual
4
Fiber Testing
Setting Up an Autotest
Choosing the Test Configuration
To choose either single-ended or double-ended testing:
1
On the Fiber Autotest Settings screen, press Setup, then press Edit.
The test Configuration Setup screen displays.
2
Press either Double Ended or Single Ended, then press OK. The
Fiber Autotest Settings screen displays, with the selected
configuration next to Setup.
Setting the Loss Limit
To set the loss limit for fiber testing:
1
On the Fiber Autotest Settings screen, press Loss Limit, then Edit.
The Loss Limit Setup screen displays.
Advertising