Agilent Technologies N2610A - Manual (Page 238)

230 Agilent FrameScope 350 User’s Manual
9 Specifications
Fiber SmartProbe+
Fiber SmartProbe
+
General FiberSmartProbe+850nm, Fiber SmartProbe+ 1300nm Fiber SmartProbe+ 1310nm, Fiber SmartProbe+ 1550nm
Size 2.4” x 1.6” x 0.8”
(6.0 cm x 4.0 cm x 2.5 cm) 2.4” x 1.6” x 0.8”
(6.0 cm x 4.0 cm x 2.5 cm)
Optical Connectors ST® x 2 SC x 2
Power Source Draws power from WireScope 155 or
DualRemote 155 via intelligent test port interface Draws power from WireScope 155 or
DualRemote 155 via intelligent test port interface
Operating Temperature 0 o to 40 o C 0 o to 40 o C
Storage Temperature - 10 o to 55 o C - 10 o to 55 o C
Operating Humidity 10 to 90% non-condensing 10 to 90% non-condensing
Maximum Relative Humidity 80% for temperatures up to 31 C, decreasing
linearly to 50% relative humidity at 40 C 80% for temperatures up to 31 C, decreasing
linearly to 50% relative humidity at 40 C
Altitude Up to 2000 meters Up to 2000 meters
Detector FiberSmartProbe+850nm, Fiber SmartProbe+ 1300nm Fiber SmartProbe+ 1310nm, Fiber SmartProbe+ 1550nm
Receive Wavelengths 850 and 1300nm 1310nm and 1550nm
Measurement Accuracy +/-0.2dB @ -20dBm +/-0.2dB @ -20dBm
Dynamic Range 0 to –40 dBm 0 to –40 dBm
Detector Type Germanium Germanium
Transmitter FiberSmartProbe+850nm, Fiber SmartProbe+ 1300nm Fiber SmartProbe+ 1310nm, Fiber SmartProbe+ 1550nm
Power Output (into 62.5/125 multimode fiber)
-10dBm (850nm), -15dBm (1300nm) (into 9/125 singlemode fiber)
-3 dBm (1310nm and 1550nm)
Source Type LED Stabilized Class 1 LASER 2 product in accordance
with EN 60825.1 and FDA 21 CFR 1040.10.
Center Wavelength 1310nm +/- 30nm, 1550nm +/- 30nm
Spectral Bandwidth (RMS) < 5nm
Stability N/A +/- 0.1dB, 1Hr. @ 25 C
Stabilization Time N/A < 5 min.
Cable Length FiberSmartProbe+850nm, Fiber SmartProbe+ 1300nm Fiber SmartProbe+ 1310nm, Fiber SmartProbe+ 1550nm
Accuracy (whichever is greater) +/- 4% or +/- 1.5 meters +/- 4% or +/- 1.5 meters
Resolution +/- 1.5 meters +/- 1.5 meters
Distance 1 Range 0 – 4 km for 3.75 dB/km @ 850nm
0 – 10 km for 1.50 dB/km @ 1300nm 0 – 50 km for 0.5dB/km @ 1310nm and 1550nm
Propagation Delay FiberSmartProbe+850nm, Fiber SmartProbe+ 1300nm Fiber SmartProbe+ 1310nm, Fiber SmartProbe+ 1550nm
Accuracy (whichever is greater) +/- 4% or +/- 6 nanoseconds +/- 4% or +/- 6 nanoseconds
Resolution +/- 6 nanoseconds +/- 6 nanoseconds
Range 0 – 300 microseconds 0 – 300 microseconds
1 Assumes double-ended configuration with –15dB maximum multimode
link loss and 25dB maximum singlemode link loss. Divide by two for
single-ended configuration.
2 For safety the transmitter should never be viewed directly with the naked eye, a lens, or
magnifying device.
KLASSE 1 LASER PRODUKT
• ST is a registered trademark of AT&T