Setting the measurements – Agilent Technologies N2610A User Manual
Page 137
Cable Testing in Expert Mode
5
The Expert Autotest Setup
Agilent FrameScope 350 User’s Manual
129
1
On the Autotest Setup screen, press Cable Pairing, then press Edit.
The Cable Pairing Setup screen displays.
Press the cable pairing convention used on the job, then press
OK. The Autotest Setup screen displays, with the cable pairing
convention named.
Setting the Measurements
In Expert Mode, you have the ability to specify in detail what
measurements are used to determine the certification status of
your test. In addition, there are choices for optional features.
1
In Expert Mode, press Autotest on the Main menu.
2
On the Autotest Setup screen press Edit Settings. On the Autotest
Settings screen press Measurements. The first Measurements Setup
screen identifies the required measurements for the limits you have
selected. It is possible to disable the measurements, but it is not